Cygne Matt Black Pull Out Hot Water Tap | 3 in 1 Boiling Kit
Dispatch within 24 hours
Black Pull Out Hot Water Tap – Boiling, Hot and Cold from One Spout
Matt black is where a boiling tap stops looking like an appliance and starts looking like part of the kitchen. The Cygne is a black hot water tap that does three jobs — 98°C filtered water for drinks and cooking, everyday hot and cold, and a spray head that pulls out on a hose — through one swan neck spout in a single tap hole.
The spout stands 462 mm tall, swivels to a 207 mm reach and lets the head draw out by up to 200 mm, so you can rinse a roasting tin, wash down the bowl or fill a pot standing on the drainer. A weight on the hose under the worktop pulls the head back into place. In black, that tall curve reads as one clean dark line against a pale worktop.
The two supplies are kept apart for safety. A side lever runs hot and cold; boiling water has a separate handle that only turns while you hold its push button down, and springs back to off when you let go. The pull-out hose carries the mixed water only — boiling water comes from the tank on its own line.
Under the sink is a 1.8 litre corner tank in matt black, shaped to sit in the back corner of the cupboard. It runs from a 13A plug, holds the temperature you choose — 75, 85, 92 or 98°C — and shows filter life on its push-button display. The tank is WRAS approved (No. 250604707), and a carbon filter in line before it takes out the chlorine taste.
One check before you order: the tap needs 1 bar minimum and up to 3 bar, so it suits a combi boiler or pressurised mains, not a gravity-fed cylinder in the hot press.
Features & Benefits
- Black hot water tap, 3 in 1 — 98°C filtered water plus ordinary hot and cold.
- Pull-out spray head on up to 200 mm of hose, with a weighted return.
- Push-button boiling handle that springs back to off — a deliberate two-step action.
- Matt black finish — hides water spots and fingerprints that show on chrome.
- 1.8 litre corner tank — slots into the back corner of the sink cupboard.
- Set 75, 85, 92 or 98°C on the tank's push-button display.
- Filter-life bars on the display tell you when the carbon filter is due.
- 462 mm swan neck with 360° swivel and a 207 mm reach.
- 13A plug-in tank — 1.5 kW element, 2.2 W on standby.
- 2 year manufacturer guarantee on tap and tank.
Product Specification
| Brand | ELLSI (Etal) |
|---|---|
| Range | Cygne |
| Product Type | 3 in 1 Pull-Out Boiling Water Tap Kit |
| Kit SKU | PDT-001392 |
| Tank SKU | PDT-000930 |
| Mount Type | Deck Mounted |
| Tap Holes | 1 (Ø34–37 mm) |
| Worktop Fixing | Two mounting options — up to 23 mm and over 23 mm thick |
| Controls | Side lever for hot and cold; boiling handle with push-button safety lock and spring return |
| Spout Type | Swan neck, swivel, pull-out spray head |
| Pull-Out Hose | Up to 200 mm, weighted return, carries mixed hot and cold |
| Finish | Matt Black |
| Tap Height | 462 mm |
| Tap Width | 180 mm |
| Spout Reach | 207 mm |
| Minimum Pressure | 1 bar |
| Maximum Pressure | 3 bar |
| Pressure Suitability | Combi and pressurised systems — not gravity-fed |
| Inlet Connection | ½" BSP flexible hoses |
| Tank | 1.8 litre corner tank, matt black |
| Tank Dimensions | 450 mm body, 468.6 mm to the top of the connections; 245.1 mm wide × 152.6 mm deep (triangular corner footprint) |
| Tank Rated Input | 1.5 kW, 220–240V ac 50Hz |
| Standby Power | 2.2 W |
| Temperature | 75–98°C (settings 75, 85, 92, 98°C) |
| Tank Display | Push-button digital, with filter-life indicator |
| Tank Connections | ½" BSP male inlet, ⅜" BSP female outlet |
| Tank Rating | IPX4 |
| Plug Type | Fused 13A 3-pin, 945 mm cord |
| Filter | Carbon filter kit with wall bracket and 6 mm PE pipe |
| Filter Change | Every 6 months, sooner in hard water |
| Waste Included | No |
| Certification | Tank: WRAS approved No. 250604707; EN 60335-2-21, EN 62233 |
| Guarantee | 2 Years |
What's Included
- 1 x ELLSI Cygne 3 in 1 pull-out boiling water tap in matt black, with hose weight
- 1 x 1.8 litre corner instant hot water tank (matt black) with 13A plug
- 1 x Carbon filter kit with housing bracket, 6 mm PE pipe and push-fit connectors
- 1 x Set of ½" and ⅜" BSP flexible hoses
- 1 x Under-sink mounting bracket, washers, fixing nut, clip, screws and wall plugs
- 1 x Installation and care instructions
Why Choose a Matt Black Hot Water Tap?
Because the tap you use most in the kitchen should look the part. A black boiling tap ties in with a black sink, black handles or a dark worktop, and matt black hides the water marks a busy sink leaves. Treat the coating gently: a soft damp cloth and a dry-off, never bleach, limescale remover or an abrasive pad.
For a fixed spout and a larger 2.4 litre tank, see the Elise 3 in 1 in matt black. If you only want the spray head, the Cato in matt black is a pull-out mixer and the Contra in matt black puts one on a tall spring neck. The Cygne also comes in polished chrome and brushed brass. See every kit together in boiling water taps.
We ship boiling water taps Ireland wide — Dublin, Cork, Galway, Limerick, Waterford and everywhere between — with free delivery on orders over €100 and same-day Dublin collection on stocked items by arrangement. Running costs against a kettle are in our boiling water tap guide.
Shipping
Republic of Ireland
"Standard 1-5 days"
Orders above €100 -> FREE
Orders below €100 -> 9 EUR
Small items (0-1kg) -> 7 EUR
"Express 1-3 days"
Any order -> 16 EUR
"Oversize / Heavy 20-35 kg"
Any order -> 50 EUR
Shipping costs are based on order value, parcel weight, and destination. Simply add items to your cart and use the Shipping Calculator at checkout to view the final shipping cost.
Read more about our Shipping Policy and destinations.
Return
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
For more details check our Return & Refund page.
