Cygne Chrome Pull Out Boiling Water Tap | 3 in 1 Corner Tank Kit
Dispatch within 24 hours
Pull Out Boiling Water Tap in Chrome – 3 in 1 with a 1.8 Litre Corner Tank
The Cygne puts three taps into one: filtered water at up to 98°C for tea, coffee and the pasta pot, ordinary hot and cold for everything else, and a spray head that pulls out of the spout on a hose. Most boiling taps make you choose between the kettle replacement and a proper sink tap. This pull out boiling water tap is both, so it can be the only tap on the sink.
In polished chrome it is the easiest finish to fit into an existing kitchen. The tall swan neck stands 462 mm and swivels to reach 207 mm across the bowl; draw the head out and the hose gives you up to 200 mm more to rinse a pan, wash down the sink or fill a bucket on the drainer, then a weight under the worktop pulls it back.
Hot and cold run from the side lever. Boiling water has its own handle with a push-button lock: press the button, turn the handle, and it springs back to off the moment you let go. The pull-out hose carries the mixed hot and cold, while the boiling supply runs on its own line from the tank.
Below the sink sits a 1.8 litre corner tank, shaped to tuck into the back corner of the cupboard rather than across the middle of it. It plugs into a 13A socket, heats on a 1.5 kW element and draws 2.2 W on standby, and a push-button display sets 75, 85, 92 or 98°C and shows how much life is left in the carbon filter. The tank itself is WRAS approved (No. 250604707).
Before ordering, check two things: the tap needs 1 bar to 3 bar, so a combi boiler or pressurised mains rather than a gravity-fed cylinder, and the cupboard needs a 13A socket. Our boiling water tap fitting checklist runs through the rest.
Features & Benefits
- 3 in 1 pull out boiling water tap — filtered near-boiling, hot and cold from one tap hole.
- Pull-out spray head — up to 200 mm of hose for rinsing and filling, with a weighted return.
- Separate boiling handle with a push-button safety lock and spring return to off.
- 1.8 litre corner tank — fits the back corner of the sink cupboard and leaves the middle free.
- Four temperature settings — 75, 85, 92 or 98°C from the tank's push-button display.
- Filter-life indicator on the tank, so you know when the carbon filter is due.
- Swan neck swivel spout — 462 mm tall with a 207 mm reach.
- Polished chrome — matches existing fittings and takes everyday cleaning in its stride.
- Plugs into a 13A socket — 1.5 kW element, 2.2 W standby, no hard wiring.
- 2 year manufacturer guarantee on tap and tank, handled here in Ireland.
Product Specification
| Brand | ELLSI (Etal) |
|---|---|
| Range | Cygne |
| Product Type | 3 in 1 Pull-Out Boiling Water Tap Kit |
| Kit SKU | PDT-001391 |
| Tank SKU | PDT-000930 |
| Mount Type | Deck Mounted |
| Tap Holes | 1 (Ø34–37 mm) |
| Worktop Fixing | Two mounting options — up to 23 mm and over 23 mm thick |
| Controls | Side lever for hot and cold; boiling handle with push-button safety lock and spring return |
| Spout Type | Swan neck, swivel, pull-out spray head |
| Pull-Out Hose | Up to 200 mm, weighted return, carries mixed hot and cold |
| Finish | Polished Chrome |
| Tap Height | 462 mm |
| Tap Width | 180 mm |
| Spout Reach | 207 mm |
| Minimum Pressure | 1 bar |
| Maximum Pressure | 3 bar |
| Pressure Suitability | Combi and pressurised systems — not gravity-fed |
| Inlet Connection | ½" BSP flexible hoses |
| Tank | 1.8 litre corner tank, matt black |
| Tank Dimensions | 450 mm body, 468.6 mm to the top of the connections; 245.1 mm wide × 152.6 mm deep (triangular corner footprint) |
| Tank Rated Input | 1.5 kW, 220–240V ac 50Hz |
| Standby Power | 2.2 W |
| Temperature | 75–98°C (settings 75, 85, 92, 98°C) |
| Tank Display | Push-button digital, with filter-life indicator |
| Tank Connections | ½" BSP male inlet, ⅜" BSP female outlet |
| Tank Rating | IPX4 |
| Plug Type | Fused 13A 3-pin, 945 mm cord |
| Filter | Carbon filter kit with wall bracket and 6 mm PE pipe |
| Filter Change | Every 6 months, sooner in hard water |
| Waste Included | No |
| Certification | Tank: WRAS approved No. 250604707; EN 60335-2-21, EN 62233 |
| Guarantee | 2 Years |
What's Included
- 1 x ELLSI Cygne 3 in 1 pull-out boiling water tap in chrome, with hose weight
- 1 x 1.8 litre corner instant hot water tank (matt black) with 13A plug
- 1 x Carbon filter kit with housing bracket, 6 mm PE pipe and push-fit connectors
- 1 x Set of ½" and ⅜" BSP flexible hoses
- 1 x Under-sink mounting bracket, washers, fixing nut, clip, screws and wall plugs
- 1 x Installation and care instructions
Why Choose a Pull Out Boiling Water Tap?
Because a standard boiling tap still leaves you wishing for a spray head at the sink. With the Cygne you keep the reach of a pull-out for washing up and the 98°C supply for the kettle jobs, and you lose the kettle, the filter jug and a separate mixer from the worktop. It is the boiling tap for a kitchen where the sink does real work.
If you would rather have a fixed spout, the Elise 3 in 1 in chrome is our standard boiling tap kit with a larger 2.4 litre tank. If you want the spray head without the boiling water, the Cato in chrome is a pull-out mixer on its own. The Cygne is also made in matt black and brushed brass. Compare every kit in boiling water taps or every spray-head style in pull out kitchen taps.
We ship boiling water taps Ireland wide — Dublin, Cork, Galway, Limerick, Waterford and everywhere between — with free delivery on orders over €100 and same-day Dublin collection on stocked items by arrangement. What a boiling tap costs to run against a kettle is in our boiling water tap guide.
Shipping
Republic of Ireland
"Standard 1-5 days"
Orders above €100 -> FREE
Orders below €100 -> 9 EUR
Small items (0-1kg) -> 7 EUR
"Express 1-3 days"
Any order -> 16 EUR
"Oversize / Heavy 20-35 kg"
Any order -> 50 EUR
Shipping costs are based on order value, parcel weight, and destination. Simply add items to your cart and use the Shipping Calculator at checkout to view the final shipping cost.
Read more about our Shipping Policy and destinations.
Return
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
For more details check our Return & Refund page.
