Bathroom Heating

Bathroom Heating — Radiator Valves and Pipe Covers for Irish Bathrooms

The fittings around a bathroom radiator rather than the radiator itself: radiator valves in matched pairs, snap-on pipe covers for the bare copper tails, and a flow diverter for a radiator that heats unevenly. All sized 15 mm × ½″ BSP, the domestic standard in Ireland, in chrome, matt black, anthracite and brushed brass.

This is the detail a bathroom refit almost always misses. New tiles, new tap, new waste — and then a bright copper pipe and a white plastic valve head under a black towel radiator. It is at eye level when you are sitting down, and none of it is difficult to change.

Radiator valves

Choose angled where the pipe comes out of the wall and straight where it rises from the floor. Check the existing valve before ordering — swapping like for like is the safe route.

One caveat on thermostatic valves: do not fit one in the room that holds the main house thermostat, where a TRV can fight the boiler control. In a typical bathroom with a towel radiator, a TRV is the right choice.

Pipe covers

Enzo chrome and Enzo matt black covers and collars clip around existing 15 mm pipe. No draining down, no plumber, roughly five minutes per radiator, and they hide both the pipe run and the untidy gap where it meets the floor.

A radiator hot at one end

If it is properly bled and still cool at the far end, the Milano 15 mm flow diverter pushes incoming water further along instead of letting it short-circuit to the outlet. A simpler first move than rebalancing the system or replacing the radiator.

Matching the finish

Take the finish from the taps, so the radiator stops being the one chrome object in an otherwise black bathroom. Pair these with matt black bathroom taps or chrome bathroom taps and a matching waste. For hanging towels, the bathroom accessories range has an unheated wall-mounted rail, rings and hooks.

We deliver across the Republic of Ireland — Dublin, Cork, Limerick, Waterford, Wexford and every county between — free on orders over €100, typically 2–3 working days, with same-day Dublin collection on stocked items by arrangement.

Regular price €6,00 EUR
Sale price €6,00 EUR Regular price
Black
Black
Sold Out
Regular price €20,00 EUR
Sale price €20,00 EUR Regular price €29,00 EUR
Silver
Silver
Regular price €20,00 EUR
Sale price €20,00 EUR Regular price
Black
Black
Anthracite
Anthracite
Regular price €20,00 EUR
Sale price €20,00 EUR Regular price
Gold
Gold
Regular price €30,00 EUR
Sale price €30,00 EUR Regular price €35,00 EUR
Black
Black
Regular price €6,00 EUR
Sale price €6,00 EUR Regular price
Silver
Silver
Sort by
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Frequently Asked Questions

Why do bathroom radiator pipes look so untidy?
Because in most Irish homes the copper tails were cut and soldered on site, then never covered. In a tiled bathroom that bare pipe and the gap where it meets the floor is at eye level when you are sitting down. Enzo chrome pipe covers and collars or the matt black version clip over 15 mm pipe and hide both, in about five minutes per radiator.
Should I fit a thermostatic valve in a bathroom?
Usually yes, with one caveat. A thermostatic radiator valve stops the bathroom overheating and cuts fuel use. The exception is a room containing the main room thermostat, where a TRV can fight the boiler control. In a typical Irish bathroom with a towel radiator, a TRV is the right choice.
Can I match heating fittings to matt black or brushed brass bathroom taps?
Yes. Valves and pipe covers come in chrome, matt black, anthracite and brushed brass, so the radiator stops being the one chrome object in an otherwise black bathroom. Pair them with our matt black bathroom taps or chrome bathroom taps, and matching wastes.
What is a flow diverter and do I need one?
A flow diverter pushes incoming hot water further along the radiator instead of letting it short-circuit straight to the outlet. It helps when a radiator is hot at one end and cool at the other despite being properly bled and balanced. It is a cheap thing to try before assuming the radiator is undersized.
Do these fit standard Irish pipework?
Yes - everything here is for 15 mm copper pipe with 1/2 inch radiator connections, the domestic standard in Ireland. Check whether your existing valves are angled or straight before ordering, and measure the pipe if you suspect 10 mm microbore. Free delivery on Irish orders over €100.