Instant Boiling Water Tap | 3 in 1 Chrome with 2.4L Tank
Dispatch within 24 hours
3 in 1 Boiling Water Tap – Chrome, 2.4 Litre Tank and Carbon Filter
One tap, three jobs. This boiling water tap delivers filtered water at up to 98°C from the left-hand lever, and ordinary hot and cold from the right — so the kettle, the filter jug and the mixer tap all become one fitting in a single tap hole. Tea in seconds, pasta water without the wait, and a worktop with one less appliance on it.
The system is three parts. The chrome tap sits on the sink; a 2.4 litre stainless-lined tank mounts in the cupboard below and holds water at temperature; a carbon filter in line before the tank takes out chlorine taste and scale. All three are supplied together, with the fittings to connect them.
The tank runs on a 1.5 kW element from a standard 13A plug, drawing 2.2 W on standby, and its touch-screen control lets you set the delivery temperature anywhere from 75°C to 98°C. Lower settings suit green tea and baby bottles; the top end is a rolling boil for pasta and blanching. It is rated IPX4 and carries a 2 year guarantee.
Two things to measure before ordering. The tank stands 330 mm tall and needs a 13A socket inside the sink cupboard, so check both the height and the power. And the tap wants 1 bar minimum — this is not one for a gravity-fed cylinder in the hot press. Get those right and installation is a straightforward single-hole fit.
Features & Benefits
- 3 in 1 boiling water tap — filtered boiling, plus standard hot and cold, from one spout and one tap hole.
- Adjustable 75–98°C via a touch-screen digital control on the tank, so you can dial it to what you actually drink.
- 2.4 litre tank — enough for roughly ten mugs before it needs to recover.
- Carbon filter included, rated 3.5 l/min, removing chlorine taste and reducing scale.
- Separate boiling lever on the left, standard mixer on the right — the boiling side cannot be knocked on in passing.
- 1.5 kW element on a 13A plug with 2.2 W standby — no hard wiring, no electrician for the socket if one is already there.
- Polished chrome finish over a brass tap body, with a 35 mm cartridge and swivel spout.
- 201 mm spout reach at 260 mm height — clears a large pan and covers a double bowl.
- IPX4 rated tank, CE marked to EN 60335 and EN 55015.
- 2 year manufacturer guarantee on tap and tank, handled here in Ireland.
Product Specification
| Brand | ELLSI (Etal) |
|---|---|
| Product Type | 3 in 1 Instant Boiling Water Tap |
| Tap SKU | PDT-000047C |
| Tank SKU | PDT-000215 |
| Filter SKU | PDT-000052 |
| Mount Type | Deck Mounted |
| Tap Holes | 1 |
| Control Type | Twin lever — boiling left, hot/cold/filtered right |
| Finish | Polished Chrome |
| Material | Brass tap body |
| Cartridge | 35 mm |
| Flow Type | Tri-flow |
| Spout Type | Squared, swivel |
| Minimum Pressure | 1 bar |
| Maximum Pressure | 3 bar |
| Pressure Suitability | All plumbing systems, preferably balanced — not gravity-fed |
| Inlet Connection | 1/2" flexible tails, supplied |
| Tap Height | 358.5 mm |
| Height to Spout Outlet | 260 mm |
| Spout Reach | 201 mm |
| Tap Width | 165.5 mm |
| Spout Diameter | 24 mm |
| Tank Capacity | 2.4 litres |
| Tank Rated Input | 1.5 kW, 220–240V ac 50Hz |
| Standby Power | 2.2 W |
| Temperature Range | 75–98°C, touch screen control |
| Tank Dimensions | 330 mm H × 210 mm W × 224 mm D |
| Tank Rating | IPX4 |
| Plug Type | Fused 13A 3-pin, 910 mm cord |
| Filter Type | Carbon, wall mounted |
| Filter Capacity | 3.5 l/min |
| Filter Replacement Cycle | 3–6 months |
| Filter Dimensions | 310 mm H × 70 mm W × 88 mm D |
| Waste Included | No |
| Certification | CE — EN 60335, EN 55015, EN 61000 |
| Guarantee | 2 Years |
What's Included
- 1 x ELLSI 3 in 1 boiling water tap in polished chrome
- 1 x 2.4 litre instant hot water tank with touch screen control
- 1 x Carbon water filter with wall bracket and PE tubing
- 1 x Set of 1/2" flexible tap tails and BSP adaptors
- 1 x Installation and care instructions
Why Choose a Boiling Water Tap?
The honest case is time and worktop. A kettle takes two to three minutes and lives permanently on the counter; this gives you the same water in about two seconds and hides the hardware in the cupboard. Households that make tea and coffee all day notice it within a week, and it removes the filter jug from the fridge at the same time.
The honest cost is that it is a fitted appliance, not a tap. It needs a socket, cupboard space and a filter change two to four times a year. If you make three cups of tea a week, a kettle is the better answer and you will not regret keeping it.
Where this one differs from the market is price. Boiling water taps in Ireland typically start around €555 and premium brands run past €1,000. This is the same 3 in 1 arrangement — tap, tank, filter, adjustable to 98°C — at a fraction of that, because it is an ELLSI system rather than a designer badge.
If a boiling tap is more appliance than you want, a conventional mixer does the everyday job well: the Stroud Chrome is a twin lever in the same squared style, the Tivoli Chrome is a slim single lever that runs from 0.5 bar, and the Cato Chrome adds a pull-out spray.
We ship boiling water taps Ireland wide — Dublin, Cork, Galway, Limerick, Waterford and everywhere between — with same-day Dublin pickup on stocked items. Browse all kitchen taps to compare.
Shipping
Republic of Ireland & Northern Ireland
"Standard 1-5 days"
Orders above €100 -> FREE
Orders below €100 -> 9 EUR
"Express 1-3 days"
Any order -> 16 EUR
"Oversize / Heavy 20-35 kg"
Any order -> 50 EUR
Shipping costs are based on order value, parcel weight, and destination. Simply add items to your cart and use the Shipping Calculator at checkout to view the final shipping cost.
Read more about our Shipping Policy and destinations.
Return
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
For more details check our Return & Refund page.
