Brushed Steel Boiling Water Tap | 3 in 1 Kit with 2.4L Tank & Filter
Dispatch within 24 hours
Brushed Steel Boiling Water Tap – 3 in 1 Kit with 2.4 Litre Tank and Carbon Filter
A boiling water kitchen tap in the finish that suits most kitchens with stainless in them. This 3 in 1 kit gives you filtered water at up to 98°C from the left lever and ordinary hot and cold from the right, through one swivel spout in a single tap hole — so the kettle, the filter jug and the mixer tap become one fitting.
Brushed steel is the practical reason to choose this version. The fine directional grain sits in the same cool grey as a stainless sink, oven door or fridge handle, so the tap looks like part of the kitchen rather than an addition to it. It also hides the fingerprints and water spots that polished chrome shows within minutes — useful on a tap you will use for every cup of tea.
Two details make it easier to live with in a family kitchen. The boiling lever has a child-safe spring lock, so it cannot be opened by a casual knock or a curious hand, and ELLSI insulates the spout so it stays cool to the touch while it dispenses hot water.
The kit is three parts, supplied together. The tap sits on the sink; a 2.4 litre tank stands in the cupboard below and keeps water at temperature on a 1.5 kW element from a standard 13A plug, drawing 2.2 W on standby; and a carbon filter in line before the tank takes out the chlorine taste and much of the scale. A touch-screen control on the tank sets the delivery temperature anywhere from 75°C to 98°C.
Two checks before ordering. The tank needs 330 mm of height and a 13A socket inside the sink cupboard, and the tap needs 1 bar minimum — it is a combi or mains-pressure appliance, not one for a gravity-fed cylinder. Our guide covers the five things to check before ordering a boiling water tap and what one costs to run compared with a kettle.
Features & Benefits
- 3 in 1 boiling water kitchen tap — filtered near-boiling water, plus normal hot and cold, from one spout.
- Child-safe spring lock on the boiling lever to prevent accidental dispensing.
- Insulated spout that stays cool to the touch while hot water runs.
- Brushed steel finish that matches stainless sinks and appliances and hides water marks.
- Adjustable 75–98°C from a touch-screen control on the tank.
- 2.4 litre tank — roughly ten mugs before it needs to recover.
- Carbon filter included, rated 3.5 l/min, for better-tasting water and less scale.
- Strong everyday flow — 7.2 litres a minute of mixed hot and cold at 1 bar, 9.2 at 3 bar.
- Plugs into a 13A socket — 1.5 kW element, 2.2 W standby, no hard wiring.
- Kiwa Reg 4 listed tap made to EN 817, with a 2 year manufacturer guarantee on tap and tank.
Product Specification
| Brand | ELLSI (Etal) |
|---|---|
| Range | Elise |
| Product Type | 3 in 1 Instant Boiling Water Tap Kit |
| Kit SKU | PDT-000208-215-52 |
| Tap SKU | PDT-000208C |
| Tank SKU | PDT-000215 |
| Filter SKU | PDT-000052 |
| Mount Type | Deck Mounted |
| Tap Holes | 1 |
| Control Type | Twin lever, ¼ turn — boiling left (spring lock), hot/cold right |
| Finish | Brushed Steel |
| Material | Brass tap body |
| Cartridge | 35 mm ceramic |
| Aerator | Flow straightener |
| Flow Type | Tri-flow |
| Flow Rate (mixed hot/cold) | 3.8 L/min at 0.2 bar · 6 at 0.5 bar · 7.2 at 1 bar · 8 at 2 bar · 9.2 at 3 bar |
| Spout Type | Squared, swivel, insulated |
| Minimum Pressure | 1 bar |
| Maximum Pressure | 3 bar |
| Pressure Suitability | Combi and pressurised systems — not gravity-fed |
| Inlet Connection | G ½" flexible tails, 600 mm, supplied |
| Tap Height | 358 mm |
| Height to Spout Outlet | 260 mm |
| Spout Reach | 201 mm |
| Tap Width | 165 mm |
| Tap Weight | 2.3 kg |
| Tank Capacity | 2.4 litres |
| Tank Finish | Matt black |
| Tank Rated Input | 1.5 kW, 220–240V ac 50Hz |
| Standby Power | 2.2 W |
| Temperature Range | 75–98°C, touch screen control |
| Tank Dimensions | 330 mm H × 210 mm W × 224 mm D |
| Tank Rating | IPX4 |
| Plug Type | Fused 13A 3-pin, 910 mm cord |
| Filter Type | Inline activated carbon, wall mounted |
| Filter Rated Flow | 3.5 l/min |
| Filter Replacement Cycle | 3–6 months, depending on water hardness |
| Waste Included | No |
| Certification | Tap: EN 817:2014, Kiwa Reg 4 No. 2404712. Tank: CE — EN 60335, EN 55015, EN 61000 |
| Guarantee | 2 Years |
What's Included
- 1 x ELLSI Elise 3 in 1 boiling water tap in brushed steel
- 1 x 2.4 litre instant hot water tank with touch screen control
- 1 x Carbon water filter with wall bracket and PE tubing
- 1 x Set of 600 mm flexible tap tails and BSP adaptors
- 1 x Installation and care instructions
Living With a Brushed Steel Boiling Tap
The only routine is a filter change every three to six months, sooner in hard-water areas. Skip it and nothing breaks on the day, but the water goes back to tasting of the mains and scale starts building on the tank element and around the spout. Routine changes need only the replacement filter cartridge (PDT-000053); the full inline water filter kit (PDT-000052) is only for replacing the filter head.
Clean the tap with warm soapy water and a soft cloth, wiping along the grain, and dry it. Brushed steel is forgiving, but abrasive pads cut across the grain and leave marks that show, so keep those away from it.
Which Finish?
The same 3 in 1 system — tank, filter and temperature range — also comes in polished chrome, matt black and brushed brass. Choose brushed steel when the kitchen is built around stainless and you want the tap to show the fewest marks. Compare all of them in boiling water taps.
If a boiling tap is more appliance than you need, a conventional mixer in the same finish does the everyday job: the Tivoli is a slim single lever, the Stroud a squared twin lever and the Cato a pull-out spray.
We ship boiling water taps Ireland wide — Dublin, Cork, Galway, Limerick, Waterford and everywhere between — with same-day Dublin pickup on stocked items. Browse all kitchen taps to compare.
Shipping
Republic of Ireland
"Standard 1-5 days"
Orders above €100 -> FREE
Orders below €100 -> 9 EUR
Small items (0-1kg) -> 7 EUR
"Express 1-3 days"
Any order -> 16 EUR
"Oversize / Heavy 20-35 kg"
Any order -> 50 EUR
Shipping costs are based on order value, parcel weight, and destination. Simply add items to your cart and use the Shipping Calculator at checkout to view the final shipping cost.
Read more about our Shipping Policy and destinations.
Return
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
For more details check our Return & Refund page.