Stroud Brushed Steel Kitchen Tap | Twin Lever Mixer

Stroud Brushed Steel Kitchen Tap – Twin Levers on a Squared Spout, PVD Finish

Most brushed steel kitchen taps are single levers. The Stroud gives you the same cool, low-maintenance finish with twin levers — a hot side and a cold side, each a quarter turn from off to full — on a squared, L-shaped spout that looks sharp next to modern handleless units. ELLSI make it as the Eben; the Stroud name is the one most Irish and UK retailers use.

The finish is the detail that sets it apart. This is PVD brushed steel over a solid brass body, not a stainless casting. PVD is bonded to the surface in a vacuum chamber rather than sprayed or plated on, which is why it holds up against the scratches and dulling a busy sink inflicts. The result looks like stainless and sits beside a steel sink, hob and appliance handles without a mismatch in tone — but the tap has the weight of brass in the hand.

The spout swivels a full 360°, rising to 324 mm, so it clears a second bowl and fills a tall pot without tilting it. A flow straightener keeps the stream smooth rather than splashy.

Check your pressure before ordering: the Stroud needs 1 bar minimum and is not suitable for gravity-fed systems. It is made for a combi boiler or pressurised mains. If your hot water comes from a cylinder in the hot press, the brushed steel alternatives linked below run from 0.5 bar.

Features & Benefits

• PVD brushed steel finish — vacuum-bonded, so it resists scratching and keeps its tone.
• Twin quarter-turn levers for separate hot and cold control.
• Quarter-turn ceramic disc valves — no washers to perish or drip.
• Squared L-shaped spout rising to 324 mm, with a 200 mm reach.
• 360° swivel to serve a 1.5 or double bowl.
• Solid brass body under the steel-look finish.
• Flow straightener for a clean, low-splash stream.
• Single tap hole, deck mounted, with 600 mm flexible tails supplied.
• 2 year manufacturer guarantee, handled here in Ireland.

Product Specification

What's Included

• 1 x ELLSI Eben (Stroud) brushed steel twin lever kitchen mixer tap
• 2 x 600 mm flexible tap tails
• 1 x Fixing kit
• 1 x Installation and care instructions

Which Brushed Steel Tap Suits Your Kitchen?

Choose the Stroud if you want twin levers and a squared, modern profile, and you have combi or mains pressure. Its finish is PVD, bonded rather than plated, which is what you want on a tap that gets handled all day.

On a gravity-fed supply, look at the Adria in brushed steel, a dual lever on a curved spout that runs from 0.5 bar, or the Tivoli in brushed steel, a single lever swan neck with a 304 stainless body. For a pull-out spray, the Cato is the one.

The same Stroud body is stocked in polished chrome, matt black, brushed brass and brushed copper. Clean it with warm soapy water and a soft cloth, wiping along the grain, and keep abrasive pads and limescale remover away from it.

We ship kitchen taps Ireland wide — Dublin, Cork, Galway, Limerick, Waterford and everywhere between — with free delivery on orders over €100 and same-day Dublin pickup on stocked items. Browse all kitchen taps to compare.