Top-Fix Chrome Kitchen Sink Strainer Waste | 90mm, Fits From Above

Chrome Kitchen Sink Strainer Waste – 90mm Basket Strainer That Fits From Above

The kitchen sink strainer is the part of the sink you deal with every day: it catches peelings, rice and tea leaves before they reach the trap, and lifts out to empty into the bin. This one is finished in polished stainless steel, the bright chrome-look surface that sits flush and unremarkable in a stainless sink — which is exactly what most people want from a waste.

What makes it different is how it goes in. Top-Fix, ELLSI's daughter brand for kitchen wastes, uses a patented fitting system: you drop the waste into the 90 mm hole from above, then tighten a single nut through the centre with the 14 mm socket tool in the box. The rubber seal is already fitted, so there is no silicone to smear on, no putty, and nobody lying in the cupboard holding a backnut while someone else turns the strainer.

The flange and basket are stainless steel and the body is polypropylene, which will not corrode in a cupboard that stays damp. Underneath, the 40 mm (1 ½") outlet connects to the standard trap used under an Irish kitchen sink, so it is a like-for-like strainer waste swap rather than a re-plumb — whether you call it a waste or a kitchen sink drain.

Two checks before ordering. This version has no overflow connection, so it suits sinks without an overflow hole near the rim — if your sink has one, choose the chrome waste kit with overflow instead. And the sink needs to be between 0.5 mm and 15 mm thick at the waste hole, which covers stainless steel sinks comfortably.

Features & Benefits

• Kitchen sink strainer for the standard 90 mm waste hole, with a 114 mm flange.
• Fits from above — drop in and tighten one nut with the supplied 14 mm tool.
• Pre-assembled rubber seal — no silicone or plumber's putty needed.
• Removable strainer basket with a centre knob to lift it out and empty it.
• Polished stainless steel flange and basket — no plating to chip or peel.
• 40 mm (1 ½") outlet to suit a standard kitchen sink trap.
• For sinks 0.5–15 mm thick at the waste hole.
• No overflow connection — for sinks without an overflow hole.
• Made to EN 274-1, the European standard for sanitary waste fittings.

Product Specification

What's Included

• 1 x Top-Fix kitchen sink strainer waste in polished stainless steel, with pre-assembled seal
• 1 x Removable strainer basket in polished stainless steel
• 1 x Top-Fix 14 mm installation tool
• 1 x Fitting guide

Why Choose a Chrome Kitchen Sink Strainer?

Because a waste is the one fitting that should disappear. Polished steel matches a stainless sink and every chrome tap above it, and because the surface is the steel itself rather than a coating, ordinary washing-up liquid and a scourer-free cloth keep it bright for years. The Tivoli in chrome, Cato in chrome and Luxus in chrome all sit naturally above it.

The same Top-Fix waste also comes in matt black, brushed brass and antique brass, each with or without an overflow kit. Compare them all in kitchen sink wastes, and if you are fitting out the whole sink area, our kitchen setup guide covers what else is worth checking.

We ship kitchen sink strainers across Ireland — Dublin, Cork, Galway, Limerick, Waterford and everywhere between — with free delivery on orders over €100 and same-day Dublin collection on stocked items by arrangement.